Year 10 · Original DASKEREL extended lesson · Academic review pending
Measurement bounds and reliable interval calculations
Allow up to 50 minutes for reading, practice and review · Source route: Oak Higher mathematics · board-neutral DASKEREL beta; academic review required
DASKEREL wrote this resource using the Oak National Academy unit sequence as a curriculum reference. It is an extended lesson, not a complete unit or an exam-board-approved course. Academic review remains pending.
You will learn to
- Construct a half-open interval from a rounded measurement.
- Calculate lower and upper bounds for positive products and quotients.
- Explain why an upper bound may be approached but not reached.
Key terms: degree of accuracy · lower bound · upper bound · interval · half-open · error interval
Teaching sequence
Check these ideas before you begin:
- Round positive decimals to whole numbers and tenths.
- Multiply and divide positive decimals with units.
1. Retrieve precision · about 6 minutes
Teach or study: Contrast 12 cm and 12.00 cm and ask which rounded place each states.
Try: Write the rounding unit and half-unit for each displayed value.
2. Model interval notation · about 12 minutes
Teach or study: Use a number line to justify the included lower and excluded upper endpoint.
Try: Construct intervals for three readings and explain one endpoint aloud.
3. Model products and quotients · about 12 minutes
Teach or study: Work through the area example, then vary the numerator and denominator separately for speed.
Try: Predict which endpoints make each expression smallest before calculating.
4. Guided and independent problems · about 15 minutes
Teach or study: Probe endpoint choices and units; ask pupils to check approximate central values.
Try: Complete the guided area and six answered checks, showing interval arithmetic.
5. Assess and correct · about 5 minutes
Teach or study: Use exit responses to distinguish rounding intervals from calculated bounds.
Try: Answer both exit prompts and correct a strict-inequality error.
Learn the idea
A measurement printed as 7.4 cm to the nearest tenth is not known to be exactly 7.4 cm. Rounding to one decimal place groups together every original value from 7.35 cm up to, but excluding, 7.45 cm. Write 7.35 ≤ x < 7.45. The lower endpoint rounds up to 7.4; the upper endpoint rounds up to 7.5 under the usual school rounding convention. This is why the interval has one closed end and one open end. State the precision before calculating: an integer, tenth or hundredth produces different interval widths.
The smallest increment represented by the rounded place is called the unit of rounding. For a reading rounded to the nearest whole centimetre the unit is 1 cm and the half-unit error is 0.5 cm. A displayed 12 cm therefore represents 11.5 ≤ length < 12.5. For 12.00 cm to two decimal places, the unit is 0.01 cm, giving 11.995 ≤ length < 12.005. Writing extra zeros can communicate a different stated accuracy. Never infer that a measuring device actually achieved that accuracy from a number alone; use the precision supplied by the question.
For two positive lengths, the smallest possible rectangular area comes from multiplying both lower endpoints. The greatest limiting area comes from multiplying both upper endpoints. If the sides are 7.4 cm and 2.6 cm, each to one decimal place, their intervals are [7.35, 7.45) and [2.55, 2.65). The area is at least 7.35 × 2.55 = 18.7425 cm² and less than 7.45 × 2.65 = 19.7425 cm². The reported area 7.4 × 2.6 = 19.24 cm² is a central calculation, not a bound. Keep enough decimal places until the final interpretation.
For a positive quotient such as speed = distance ÷ time, lowering the numerator makes the quotient smaller, while increasing the denominator makes it smaller. Thus the lower speed uses lower distance divided by upper time. The upper speed uses upper distance divided by lower time. This direction must be justified, rather than mechanically dividing matching endpoints. For intervals d in [48, 50) km and t in [8, 10) hours, the speed is greater than 48 ÷ 10 = 4.8 km/h and less than 50 ÷ 8 = 6.25 km/h. Neither limiting value is reached because an open endpoint is needed in each case.
Bounds are useful when a decision depends on whether a threshold can be crossed. If a container must hold at least 12.5 litres, comparing only a rounded volume of 12.6 litres is insufficient: its lower bound might be below 12.5 litres. Make the decision from the relevant extreme and show units. In multistep questions, retain the original precision and decide whether terms are positive. For negative values, subtraction or correlated measurements, endpoint rules need more care; the simple product rule above assumes independent positive quantities. At the end, distinguish a strict upper bound from a maximum that is actually attainable.
Worked example
A rectangle measures 7.4 cm by 2.6 cm, each side rounded to the nearest 0.1 cm. Bound its area.
- First side: 7.35 ≤ L < 7.45 cm; second side: 2.55 ≤ W < 2.65 cm.
- Both sides are positive, so multiply lower endpoints: 7.35 × 2.55 = 18.7425.
- Multiply upper endpoints: 7.45 × 2.65 = 19.7425.
- The upper endpoint cannot occur because neither upper length is included.
18.7425 ≤ area < 19.7425 cm².
Try together
Sides are 4.2 cm and 3.0 cm to the nearest 0.1 cm. Find the area interval.
- Subtract and add 0.05 cm around each printed reading.
- Multiply lower with lower and upper with upper because both lengths are positive.
- Keep the upper inequality strict.
Show guided answer
4.15 ≤ L < 4.25 and 2.95 ≤ W < 3.05, so 12.2425 ≤ area < 12.9625 cm².
Practise independently
- Write the interval for 23 m rounded to the nearest metre.
Show answer and reasoning for question 1
22.5 ≤ x < 23.5 m. Half a metre is the rounding error on either side.
- Write the interval for 6.37 kg rounded to two decimal places.
Show answer and reasoning for question 2
6.365 ≤ m < 6.375 kg. Half of 0.01 kg is 0.005 kg.
- A side is 5.6 cm to the nearest 0.1 cm. Bound the perimeter of a square.
Show answer and reasoning for question 3
22.2 ≤ P < 22.6 cm. 5.55 ≤ s < 5.65; multiply each endpoint by four.
- A mass is 12 kg to the nearest kg and a price is £3 per kg exactly. Bound the cost.
Show answer and reasoning for question 4
£34.50 ≤ cost < £37.50. 11.5 ≤ mass < 12.5 kg; multiply by the exact positive price 3.
- Distance is in [48, 50) km and time is in [8, 10) h. Bound speed.
Show answer and reasoning for question 5
4.8 < speed < 6.25 km/h. The lower limit is 48/10 and the upper limit is 50/8; both require an excluded endpoint.
- A length is 9.8 cm to the nearest 0.1 cm. Is 9.85 cm an allowed original value?
Show answer and reasoning for question 6
No. The interval is [9.75, 9.85); 9.85 rounds to 9.9 cm.
DASKEREL exam-style practice · 5 draft marks
This original practice task and guidance are not an official examination-board paper or mark scheme.
A rectangular sheet is 6.4 cm long and 3.2 cm wide, each rounded to the nearest tenth. Find the lower and upper area bounds and explain whether the upper value can occur.
Show draft mark guidance
- State 6.35 ≤ L < 6.45 (1).
- State 3.15 ≤ W < 3.25 (1).
- Lower area 6.35 × 3.15 = 20.0025 cm² (1).
- Upper area 6.45 × 3.25 = 20.9625 cm² (1).
- State 20.0025 ≤ A < 20.9625 cm² and explain that the open length endpoints exclude the upper area (1).
Exit ticket
Answer without looking back, then check your reasoning.
- Write the error interval for 8.2 m to the nearest tenth.
Show answer
8.15 ≤ x < 8.25 m.
- For positive a in [2, 3) and b in [4, 5), give a lower bound for a/b.
Show answer
a/b > 2/5 = 0.4; the limit is not reached because b < 5.
Check your understanding
- The printed value is not necessarily the original exact measurement.
- A quotient's lower bound uses a larger positive denominator.
- An excluded upper endpoint is a limiting value, not an attained maximum.
Retrieve later: Why does 7.45 cm not belong to the interval for 7.4 cm to the nearest tenth?
Next step: Apply bounds to density, speed and threshold decisions, retaining the correct strict inequalities.
Library links: Oak National Academy · Rounding, estimation and bounds (checked 2026-11-07) · DASKEREL subject library. Oak's applicable post-2022 content licence is OGL v3.0; some source assets have separate third-party rights. No Oak media is embedded here. DASKEREL is not affiliated with Oak.