DASKEREL published · Year 11 · academic review pending

Mathematics GCSE

Original DASKEREL teaching informed by an attributed Oak unit sequence. This resource remains subject to qualified academic review. Check your examination board and tier before using it for exam preparation.

Year 11 · Original DASKEREL extended lesson · Academic review pending

Vectors, midpoints and algebraic proof

Allow up to 55 minutes for reading, practice and review · Source route: Oak Higher mathematics · board-neutral DASKEREL beta; academic review required

DASKEREL wrote this resource using the Oak National Academy unit sequence as a curriculum reference. It is an extended lesson, not a complete unit or an exam-board-approved course. Academic review remains pending.

You will learn to

  • Find a displacement vector from two position vectors.
  • Use vector addition and scalar multiplication to locate a point on a segment.
  • Prove a geometric relation by comparing directed vectors.

Key terms: position vector · displacement · component · scalar multiple · midpoint · parallel

Teaching sequence

Check these ideas before you begin:

  • Subtract signed coordinate pairs accurately.
  • Use fraction and scalar multiplication with algebraic expressions.
  1. 1. Retrieve coordinate movement · about 6 minutes

    Teach or study: Ask pupils to reverse one journey and inspect the change of sign.

    Try: Find AB and BA for a simple pair of points.

  2. 2. Model vector operations · about 12 minutes

    Teach or study: Connect component addition to a two-leg journey on a grid.

    Try: Add and scale three short vectors, then check by drawing.

  3. 3. Derive midpoint proof · about 15 minutes

    Teach or study: Derive OM = OA + half AB rather than presenting only the memorised formula.

    Try: Calculate a numerical midpoint and reproduce the algebraic derivation.

  4. 4. Apply and reason · about 16 minutes

    Teach or study: Probe direction and point order in the independent checks and exam-style proof.

    Try: Complete the guided vector route and six answered checks.

  5. 5. Exit and feedback · about 6 minutes

    Teach or study: Diagnose sign errors and confusion between parallel and equal vectors.

    Try: Answer both exit prompts and explain one correction.

Learn the idea

A vector describes both magnitude and direction. In coordinates, the displacement from A(x₁, y₁) to B(x₂, y₂) is AB = (x₂ − x₁, y₂ − y₁). The order matters: BA = −AB. If A is (2, 1) and B is (8, 4), AB = (6, 3), meaning six units right and three up. To check a component calculation, start at A and add the proposed displacement; the result must be B. Coordinate pairs used as points and pairs used as vectors look similar, but their roles differ: a point is a location, a vector is a move.

Vectors can be added component by component, so (3, −2) + (5, 1) = (8, −1). Multiplying by a scalar stretches or reverses a vector: 2(3, −2) = (6, −4), while −(3, −2) = (−3, 2). In a triangle, travelling from A to C via B gives AC = AB + BC. This is the triangle law, and it lets us trace routes without measuring a drawing. A diagram helps orient the directions but is not proof of a numerical relation, especially when it is not drawn to scale.

The midpoint M of AB is reached by travelling half of AB from A: OM = OA + ½AB. Since AB = OB − OA, this simplifies to OM = ½(OA + OB). In coordinate form M = ((x₁+x₂)/2, (y₁+y₂)/2). For A(2, 1) and B(8, 4), AB = (6, 3) and M = (5, 2.5). Check AM = (3, 1.5) and MB = (3, 1.5). The equal directed vectors prove that M bisects the segment; merely seeing M near the centre of a sketch would not.

To show two directed segments are parallel, demonstrate that one vector is a scalar multiple of the other. For example, (6, 3) = 3(2, 1), so the corresponding segments have the same or opposite direction, depending on the sign of the multiplier. Parallel does not necessarily mean equal length. To show a quadrilateral is a parallelogram, one valid method is to establish that a pair of opposite sides are both equal and parallel as directed vectors: AB = DC. Another method is to show the two diagonals share a midpoint. State which pair of points supplies each vector, since reversing one side can introduce a sign error.

Algebraic vector proofs work even when exact lengths are unknown. If OA = a and OB = b, then AB = b − a. A point P halfway from A to B has OP = a + ½(b − a) = ½(a + b). This expression is symmetric in a and b, which agrees with the midpoint being unchanged when A and B are swapped. For a point one-third of the way from A to B, OP = a + ⅓(b − a) = ⅔a + ⅓b. Check limiting cases: at fraction zero the point is A; at fraction one it is B. Such checks expose incorrect coefficients before a longer proof is built.

Worked example

A(2, 1) and B(8, 4). Find AB and M, the midpoint; prove M bisects AB.

  1. Subtract coordinates in B minus A order: AB = (8 − 2, 4 − 1) = (6, 3).
  2. Half the displacement is (3, 1.5).
  3. Add to A: M = (2, 1) + (3, 1.5) = (5, 2.5).
  4. AM = (5 − 2, 2.5 − 1) = (3, 1.5) and MB = (8 − 5, 4 − 2.5) = (3, 1.5).

The directed halves agree, so M bisects AB.

Try together

P(−1, 3), Q(7, −5). Find PQ, midpoint N, and PN.

  • Subtract P coordinates from Q coordinates, including signs.
  • Take half of PQ and add it to P.
  • Calculate PN directly as a check.
Show guided answer

PQ = (8, −8), N = (3, −1), PN = (4, −4).

Practise independently

  1. Find AB for A(−3, 2), B(4, 6).
    Show answer and reasoning for question 1

    (7, 4). Subtract A from B componentwise: (4 − (−3), 6 − 2).

  2. If AB = (5, −2), find BA.
    Show answer and reasoning for question 2

    (−5, 2). The reverse journey is the negative vector.

  3. Find the midpoint of (−4, 7) and (2, −1).
    Show answer and reasoning for question 3

    (−1, 3). Average corresponding coordinates: (−4+2)/2 and (7−1)/2.

  4. Calculate 2(3, −1) − (4, 5).
    Show answer and reasoning for question 4

    (2, −7). (6, −2) − (4, 5) = (2, −7).

  5. Are u=(2, 3) and v=(−4, −6) parallel?
    Show answer and reasoning for question 5

    Yes, v = −2u. One is a scalar multiple of the other; the negative factor reverses direction.

  6. With OA=a and OB=b, find the point one-quarter of the way from A to B.
    Show answer and reasoning for question 6

    OP = ¾a + ¼b. OP = a + ¼(b − a), then collect coefficients.

DASKEREL exam-style practice · 6 draft marks

This original practice task and guidance are not an official examination-board paper or mark scheme.

A has position vector a and B has position vector b. M is the midpoint of AB. Show algebraically that OM = (a+b)/2. If A=(2,−1), B=(8,5), find M and show AM=MB.

Show draft mark guidance
  • State AB=b−a (1).
  • State OM=a+½AB (1).
  • Simplify to ½(a+b) (1).
  • Find AB=(6,6) (1).
  • Find M=(5,2) (1).
  • Show AM=(3,3)=MB (1).

Exit ticket

Answer without looking back, then check your reasoning.

  1. A(−2, 5), B(4, 1): find AB.
    Show answer

    AB = (6, −4).

  2. If OA = a and OB = b, write the position vector of their midpoint.
    Show answer

    (a + b)/2, since OA + ½AB = a + ½(b − a).

Check your understanding

  • AB is B minus A, while BA has opposite direction.
  • Parallel vectors may have different lengths.
  • A midpoint needs half the displacement added to a starting position, not half of one endpoint alone.

Retrieve later: Explain why AC = AB + BC and why reversing BC would change the route.

Next step: Use vector ratios and parallel-line arguments in multi-step geometric proofs.

Library links: Oak National Academy · Vectors (checked 2026-11-07) · DASKEREL subject library. Oak's applicable post-2022 content licence is OGL v3.0; some source assets have separate third-party rights. No Oak media is embedded here. DASKEREL is not affiliated with Oak.