DASKEREL published · Year 10 · academic review pending

Physics GCSE

Original DASKEREL teaching informed by an attributed Oak unit sequence. This resource remains subject to qualified academic review. Check your examination board and tier before using it for exam preparation.

Year 10 · Original DASKEREL study pack · Academic review pending

Motion calculations and graphs

Allow up to 55 minutes for reading, practice and review · Source route: Oak AQA Foundation

DASKEREL wrote this resource using the Oak National Academy unit sequence as a curriculum reference. It is a study pack, not a complete unit or an exam-board-approved course. Academic review remains pending.

You will learn to

  • Calculate speed and acceleration with appropriate units.
  • Distinguish distance from displacement and speed from velocity.
  • Interpret gradients and area on simple motion graphs.

Key terms: distance · displacement · speed · velocity · acceleration · gradient

Learn the idea

Distance is the length of a route; displacement is the straight-line change in position with direction. Speed = distance / time is scalar. Velocity describes displacement per time with direction. If a cyclist rides 300 m east then 100 m west, the distance is 400 m while the displacement is 200 m east.

Average acceleration is change in velocity divided by elapsed time: a = (v − u) / t. The unit m/s² means that velocity changes by that many metres per second each second. A negative result along a chosen positive direction indicates a decrease in velocity or acceleration in the opposite direction; it is not automatically a negative speed.

The gradient of a distance–time graph gives speed. The gradient of a velocity–time graph gives acceleration; the signed area beneath it gives displacement. For a straight-line segment from 0 to 8 m/s over 4 s, the triangular area is 1/2 × 4 × 8 = 16 m. Label both axes and their units before calculating.

Worked example

A trolley speeds up uniformly from 2 m/s to 10 m/s in 4 s. Find acceleration and displacement over that interval.

  1. Acceleration = (10 − 2) / 4 = 2 m/s².
  2. Average velocity for uniform acceleration = (2 + 10) / 2 = 6 m/s.
  3. Displacement = average velocity × time = 6 × 4 = 24 m.
  4. Check using velocity–time area: rectangle 2 × 4 = 8 m plus triangle 1/2 × 4 × 8 = 16 m, total 24 m.

The trolley accelerates at 2 m/s² and travels 24 m in the stated direction.

Try together

A vehicle changes velocity from 5 to 17 m/s in 6 s. Find acceleration and distance if the change is uniform.

  • Use (v − u) / t for acceleration.
  • Average velocity is (u + v) / 2 for uniform acceleration.
Show guided answer

Acceleration = 2 m/s²; distance = 11 × 6 = 66 m.

Practise independently

  1. A runner covers 150 m in 25 s. Find average speed.
    Show answer and reasoning for question 1

    6 m/s. 150 / 25 = 6; include the unit.

  2. A car goes from 20 m/s to 8 m/s in 4 s. Find acceleration in the forward-positive direction.
    Show answer and reasoning for question 2

    −3 m/s². (8 − 20) / 4 = −3; velocity is decreasing in that chosen direction.

  3. What displacement is represented by a velocity–time rectangle 3 s wide and 7 m/s high?
    Show answer and reasoning for question 3

    21 m. Area = 3 × 7 = 21; seconds cancel from m/s × s.

DASKEREL exam-style practice · 6 draft marks

This original practice task and guidance are not an official examination-board paper or mark scheme.

A vehicle moves at 4 m/s for 3 s, then accelerates uniformly to 12 m/s over the next 4 s. Calculate total displacement and acceleration during the second part. (6 marks)

Show draft mark guidance
  • First displacement 4 × 3 = 12 m.
  • Second interval average velocity (4 + 12) / 2 = 8 m/s.
  • Second displacement 8 × 4 = 32 m.
  • Total displacement 44 m.
  • Acceleration (12 − 4) / 4 = 2 m/s².
  • Correct units and clear working throughout.

Check your understanding

  • A velocity–time graph's height gives velocity, not displacement.
  • Distance and displacement differ when direction reverses.
  • The displacement from a velocity–time graph is area, not gradient.

Retrieve later: Sketch two graph shapes for constant velocity and uniform acceleration; explain what each gradient means.

Next step: Investigate resultant force and acceleration, then repeat one graph calculation without notes.

Library links: Oak National Academy · Measuring and calculating motion (checked 2026-11-06) · DASKEREL subject library. Oak's applicable post-2022 content licence is OGL v3.0; some source assets have separate third-party rights. No Oak media is embedded here. DASKEREL is not affiliated with Oak.