Year 11 · Original DASKEREL study pack · Academic review pending
Resultant force, acceleration and stopping
Allow up to 55 minutes for reading, practice and review · Source route: Oak AQA Foundation
DASKEREL wrote this resource using the Oak National Academy unit sequence as a curriculum reference. It is a study pack, not a complete unit or an exam-board-approved course. Academic review remains pending.
You will learn to
- Calculate resultant force and use F = ma for constant mass.
- Explain what balanced forces do and do not imply about motion.
- Separate thinking distance and braking distance when interpreting stopping distance.
Key terms: resultant force · inertia · mass · acceleration · thinking distance · braking distance
Learn the idea
Forces are vectors. Add forces in the same direction and subtract opposing forces to find the resultant. A resultant of zero means no change in velocity: an object may remain still or continue in a straight line at constant velocity. A force is required to change velocity, not to sustain motion in an ideal frictionless model.
For a constant mass, resultant force F = ma. Mass is measured in kilograms, acceleration in m/s² and force in newtons. One newton causes a 1 kg mass to accelerate at 1 m/s². A calculation is only meaningful if the force used is the resultant force, not one isolated force when others oppose it.
Stopping distance = thinking distance + braking distance. Thinking distance grows when reaction time or initial speed increases; braking distance is affected by speed, road condition, tyres and brakes. The relationship of braking distance to speed is not generally linear, so doubling speed can increase stopping distance by more than double. An online lesson cannot replace a supervised practical or road-safety decision.
Worked example
A 900 kg car has a forward driving force of 2700 N and an opposing resistive force of 900 N. Find acceleration, then state what would happen if the driving force fell to 900 N while resistance stayed the same.
- Choose forward as positive; resultant force is 2700 − 900 = 1800 N.
- Use a = F / m = 1800 / 900 = 2 m/s² forward.
- If driving and resistive forces are both 900 N, resultant force becomes 0 N.
- Zero resultant means zero acceleration; a moving car continues at constant velocity in this simplified model.
The initial acceleration is 2 m/s². Balanced forces later mean constant velocity, not necessarily rest.
Try together
Two horizontal forces of 500 N right and 200 N left act on a 100 kg object. Calculate acceleration.
- Find the resultant with a stated positive direction.
- Divide resultant force by mass.
Show guided answer
Resultant 300 N right; acceleration 3 m/s² right.
Practise independently
- A 2 kg object accelerates at 4 m/s². What is its resultant force?
Show answer and reasoning for question 1
8 N. F = ma = 2 × 4.
- A moving bicycle experiences balanced horizontal forces. What happens to its velocity in the simplified model?
Show answer and reasoning for question 2
It remains constant in magnitude and direction. Balanced forces mean zero acceleration, not zero velocity.
- A driver's thinking distance is 12 m and braking distance is 28 m. Find stopping distance.
Show answer and reasoning for question 3
40 m. Stopping distance is the sum of the two distinct stages.
DASKEREL exam-style practice · 6 draft marks
This original practice task and guidance are not an official examination-board paper or mark scheme.
A 1200 kg vehicle experiences 3600 N forward and 1200 N resistance. Calculate acceleration. Explain two conditions that could increase stopping distance. (6 marks)
Show draft mark guidance
- Resultant force = 2400 N forward.
- a = F / m = 2400 / 1200.
- Acceleration = 2 m/s² forward.
- One factor increases thinking distance, e.g. longer reaction time from distraction.
- One factor increases braking distance, e.g. wet road reduces friction.
- Explain the causal link for both factors rather than merely listing them.
Check your understanding
- Balanced forces do not necessarily mean a stationary object.
- Use the resultant force in F = ma.
- Thinking distance is travelled before the brakes take effect; braking distance follows.
Retrieve later: Explain, without notes, the two possible motion states under zero resultant force and name the two parts of stopping distance.
Next step: Use force–acceleration data to estimate mass, then evaluate the uncertainty of the measurements.
Library links: Oak National Academy · Forces make things change (checked 2026-11-06) · DASKEREL subject library. Oak's applicable post-2022 content licence is OGL v3.0; some source assets have separate third-party rights. No Oak media is embedded here. DASKEREL is not affiliated with Oak.