DASKEREL published · Year 11 · academic review pending

Statistics GCSE

Original DASKEREL teaching informed by the attributed AQA GCSE Statistics 8382 specification. This resource remains subject to qualified academic review. Check your examination board and tier before using it for exam preparation.

Year 11 · Original DASKEREL internally approved learning resource · AQA GCSE Statistics 8382 · Academic review pending

From a question to a defensible statistical conclusion

Allow up to 60 minutes for reading, practice and review · Source route: DASKEREL Year 11 placement · AQA GCSE Statistics 8382, Foundation/Higher choice pending; academic review required

DASKEREL wrote this resource using the AQA GCSE Statistics 8382 specification as a curriculum reference. It is an internally approved learning resource, not a complete unit or an exam-board-approved course. Academic review remains pending.

DASKEREL authorised this resource for its own platform on 2026-11-07 after independent AI editorial checks recorded 2026-11-07. The checks cover topic fit, answers, original assessment guidance, accessibility and source rights. This internal decision is not approval by an awarding body or a qualified academic reviewer.

You will learn to

  • Plan a statistical question, population, measure and collection method.
  • Calculate and interpret mean, median and range for an invented waiting-time dataset.
  • State a conclusion that fits the sample and identify a practical improvement to the enquiry.

Key terms: statistical enquiry cycle · population · sample · primary data · secondary data · mean · median · range · reliability

Teaching sequence

Check these ideas before you begin:

  • Order a list of whole-number measurements from smallest to largest.
  • Calculate a total and divide it by the number of observations.
  1. 1. Define a testable question · about 8 minutes

    Teach or study: Contrast the vague transport question with one that fixes stop, time period, variable and unit.

    Try: Rewrite an imprecise question as one that data could answer ethically.

  2. 2. Plan collection · about 12 minutes

    Teach or study: Model a population, a feasible sample and a consistent waiting-time definition without collecting personal travel details.

    Try: Specify what to record and one likely source of sampling bias.

  3. 3. Process the invented dataset · about 15 minutes

    Teach or study: Add the ten waits, locate positions five and six, and contrast what mean, median and range describe.

    Try: Recalculate 6.6, 6.5 and 9 minutes and label each result.

  4. 4. Interpret and challenge · about 18 minutes

    Teach or study: Use the worked example and six checks to distinguish a sample statement from a population-wide or causal claim.

    Try: Answer the guided and independent questions, then draft a qualified conclusion.

  5. 5. Evaluate and revisit · about 7 minutes

    Teach or study: Ask which collection change would address the short two-week limitation and which numerical result remains descriptive.

    Try: Complete both exit prompts and revise the proposed sampling plan.

Learn the idea

A statistical enquiry starts with a question that data can answer. 'Is transport good?' is too vague because 'good' could mean cost, safety, punctuality or accessibility. A clearer invented question is: 'What is the typical wait after arriving at 08:00 for the number 24 bus at one stop on weekday mornings?' Define the population before collecting anything: all such 08:00 waiting-time observations at that stop over a stated period, perhaps a term. Here waiting time means minutes from the observer's 08:00 arrival until the next bus departs; it is not the delay from the advertised timetable. State the unit, how an observation is recorded and how missing or cancelled services will be handled. Good planning prevents later calculations from answering a different question from the one asked.

The AQA Statistical Enquiry Cycle moves through initial planning, data collection, processing and presentation, interpretation, and evaluation or review. These stages are connected: a problem found during evaluation may require a better question or a new sample. In a real enquiry, obtain data in an ethical, low-risk way. Pupils should use published data or collect any real bus-stop observations only with teacher-approved supervision and road-safety arrangements. Waiting-time observations can be recorded without names, photographs or identifiable travel patterns. If using published transport data instead, check when it was collected, what it measures and whether the source covers the same stop and period. A convenient two-week sample may be quick but will not represent every season or route disruption. A conclusion should never quietly expand beyond the population actually sampled.

Consider ten invented waiting times from two consecutive weekday weeks, in minutes: 3, 4, 5, 5, 6, 7, 7, 8, 9 and 12. They are already ordered. Their sum is 66, so the mean is 66 ÷ 10 = 6.6 minutes. With ten values, the median is halfway between positions five and six: (6 + 7) ÷ 2 = 6.5 minutes. The range is 12 − 3 = 9 minutes. The mean uses every value and is affected by the longer wait of 12; the median locates the middle of the ordered observations. Neither measure says that every person waited that long. The range describes the spread between the extremes, not the typical wait. Always attach minutes and specify the dataset when reporting a statistic.

Choose a display that lets the audience see the question being answered. A table of the ten ordered values is transparent but not ideal for comparing many days; a frequency table or suitable chart can make patterns clearer. Label axes with units and avoid changing scale in a way that exaggerates a small difference. A bar chart is useful for counts in distinct categories, while a time plot can show how waits change through a sequence of days. Processing should include checks for transcription errors and an explicit rule for unusual values. Do not discard a 12-minute wait just because it changes the mean: first ask whether it is a genuine observation. If it is genuine, report and interpret it, or explain a pre-agreed exclusion rule.

The sample supports a narrow conclusion: in these ten invented observations the mean wait was 6.6 minutes, the median 6.5 and the range 9. It does not establish the average for all bus passengers or prove that one timetable policy caused delays. To improve reliability, sample on more 08:00 mornings across the stated term using a planned selection method, keep the same definition of waiting time and record disruptions. Then compare the resulting distributions rather than only one central value. Communicate uncertainty plainly to an audience that may use the result. An exam-style conclusion links the measure back to the original question, states the data's limits and proposes a specific improvement that addresses one of those limits.

Worked example

For ten invented bus waits of 3, 4, 5, 5, 6, 7, 7, 8, 9 and 12 minutes, calculate mean, median and range, then give one qualified conclusion.

  1. Add the waits: 3 + 4 + 5 + 5 + 6 + 7 + 7 + 8 + 9 + 12 = 66 minutes.
  2. Divide by ten observations: mean = 6.6 minutes.
  3. Average the fifth and sixth ordered values: median = (6 + 7) ÷ 2 = 6.5 minutes.
  4. Subtract the minimum from the maximum: range = 12 − 3 = 9 minutes.
  5. Limit the conclusion to these ten observations, not all days on the route.

In this invented sample, mean 6.6 minutes and median 6.5 minutes describe the centre, while the 9-minute range shows variation.

Try together

A student calls the 12-minute wait an 'error' solely because it is higher than the others. Explain a better decision and one collection improvement.

  • An unusual value can still be genuine.
  • Address the sample's coverage rather than deleting inconvenient data.
Show guided answer

Check the original record and the agreed definition. Keep the value if genuine, explain its influence, and sample additional mornings using the same measurement method.

Practise independently

  1. State one precise population for the invented bus enquiry.
    Show answer and reasoning for question 1

    All defined 08:00 weekday waiting-time observations at the chosen stop during the term. A population fixes the cases the question intends to describe.

  2. Calculate the mean waiting time from the ten invented values.
    Show answer and reasoning for question 2

    6.6 minutes. The ten values total 66 minutes; divide by ten observations.

  3. Calculate the range of the ten invented waiting times.
    Show answer and reasoning for question 3

    9 minutes. Maximum 12 minus minimum 3 gives a 9-minute spread.

  4. Why are two consecutive weeks a limited sample of the term?
    Show answer and reasoning for question 4

    They miss other weeks and conditions. Weather, timetable variation and disruptions may change waits over time.

  5. Should a genuine twelve-minute wait be deleted automatically?
    Show answer and reasoning for question 5

    No; retain and explain it. An unusual valid observation is part of the data unless an exclusion rule was justified in advance.

  6. Give one data-collection improvement that addresses time bias.
    Show answer and reasoning for question 6

    Sample several planned weekday mornings. Spreading observations across the defined period improves coverage of routine variation.

DASKEREL exam-style practice · 8 draft marks

This original practice task and guidance are not an official examination-board paper or mark scheme.

An invented ten-wait sample has values 3, 4, 5, 5, 6, 7, 7, 8, 9 and 12 minutes. Calculate three summaries and evaluate the claim that this proves the year-round average at the stop. (8 draft marks)

Show draft mark guidance
  • Calculate the total of 66 minutes from the listed waits.
  • Calculate the mean as 6.6 minutes.
  • Identify the fifth and sixth ordered values as 6 and 7.
  • Calculate the median as 6.5 minutes.
  • Calculate the range as 12 − 3 = 9 minutes.
  • State that the figures describe the ten observations rather than the entire year.
  • Identify a specific limitation, such as the short two-week period.
  • Propose a matching improvement, such as planned observations across the year with the same measurement method.

Exit ticket

Answer without looking back, then check your reasoning.

  1. What is the median of 3, 4, 5, 5, 6, 7, 7, 8, 9, 12?
    Show answer

    The fifth and sixth values are 6 and 7, so the median is 6.5 minutes.

  2. Why should ten invented morning waits not be presented as the route's year-round average?
    Show answer

    They sample too few occasions and may not represent other days, seasons or disruptions.

Check your understanding

  • A sample mean is not automatically the population mean.
  • The range describes spread, not the central waiting time.
  • An unusual valid value should not be silently discarded.

Retrieve later: After a day, recalculate mean, median and range from the ten waits and state one reason the claim must be limited.

Next step: Compare samples from two periods using suitable displays, then revisit the full Statistical Enquiry Cycle and its evaluation stage.

Library links: AQA GCSE Statistics 8382 · Statistical Enquiry Cycle (checked 2026-11-07) · DASKEREL subject library. The linked awarding-body specification is a curriculum reference; its text, assessment papers and mark schemes are not reproduced. DASKEREL is not affiliated with or endorsed by the awarding body.